Hikvision DS-K1T105AE User Manual

Loading ...

4.2 Access Control Terminal Wiring

You can wire the external devices, including power supply, the alarm input devices, the alarm

output devices, the security control panel, the Wiegand card, the door lock, the door contact, and

the exit buon, with the access control terminal according to the following diagram.

Figure 4-2 Wiring Overview

●

When connecng door contact and exit buon, the device and the RS-485 card reader should

use the common ground connecon.

●

You should set the face recognion terminal's Wiegand direcon as Input to connect to a

Wiegand card reader. If connects to an access controller, you should set the Wiegand direcon as

Output to transmit authencaon informaon to the access controller.

●

For details about Wiegand direcon sengs, see Set Wiegand Parameters .

●

The suggested external power supply for door lock is 12 V, 1 A. The suggested external power

supply for the Wiegand card reader is 12 V, 1 A.

●

Do not wire the device to the electric supply directly.

4.3 RS-485 Card Reader Wiring

You can connect the access control terminal with the external RS-485 card reader by wiring the

RS-485 cables and the external power supply cables with the RS-485 card reader.

Access Control Terminal User Manual

Loading ...

Hikvision DS-K1T105AE Pro Series Card Terminal