Loading ...
Loading ...
Loading ...
RIGOL Chapter 18 Store and Load
18-6 DS8000-R User Guide
External Storage and Load
Before external storage and recall, ensure that the USB disk is properly connected.
The external memory supports image saving, waveform saving, setup saving,
waveform loading, and setup loading.
1. Save the Specified Type of File to the External USB Storage Device
(Take Waveform Saving as an Example)
1) Connect a signal to the oscilloscope and obtain the stable display of
waveforms.
2) Click Storage → Save Wave to enter the waveform storage interface. The
disk management interface is displayed automatically.
3) Click to select one disk from "Removable USB Disk(D/E/F/G…)" to open the
external disk storage interface. Clicking
can go to the previous
location. Besides, you can also click NewFolder to create a new storage
folder. For details, refer to descriptions in "To Create a Folder".
4) To set the waveform saving, refer to descriptions of "Wave" in "Storage
Type".
5) Click Save to save the waveform file to the selected folder in the specified
save format.
2. Load the Specified Type of File from the External USB Storage Device
(Take Waveform Loading as an Example)
1) Click Storage → Load Wave to enter the waveform loading interface. The
disk management interface is displayed automatically.
2) Click to select one disk from "Removable USB Disk(D/E/F/G…)" to open the
external disk storage interface. Clicking
can go to the previous
location.
3) After selecting a file to be loaded, then the Load menu is enabled. Click
Load to load the selected file.
Disk Management
Click Storage → Disk to turn on the disk management interface as shown in Figure
18-1. The disk currently selected is displayed in red shading. Click to open the
selected disk.
Loading ...
Loading ...
Loading ...