Loading ...
Loading ...
Loading ...
Chapter 11 Protocol Decoding RIGOL
DS8000-R User Guide 11-21
level is displayed on the screen. The dotted line disappears in about 2 s
after you stop modifying the threshold.
4. Signal setting
Click Settings to enter the signal setting menu.
âš« Set baud rate
The following setting methods are available for baud rate:
➢ Click Baud Rate, then set the user-defined baud rate with the
displayed numeric keypad. You can also adjust the baud rate by
scrolling with the mouse.
➢ Click Baud Rate, then select the preset baud rate from the available
options. The available baud rates include 2.4 kbps, 4.8 kbps, 9.6 kbps,
19.2 kbps, and etc.
âš« Set the parity bit
Click Parity bit continuously to select whether the data contains the parity
bit.
âš« Set the protocol version
Click Version to select a protocol version that matches the LIN bus signal.
The available versions include 1.X, 2.X, and Both.
5. Display-related setting
Click Display to enter the display setting menu.
âš« Set the display format
Click Format to select the display format of the bus data. The available
display formats of the bus data are "Hex", "Dec", "Bin", and "ASCII".
âš« Adjust the vertical position of the bus
Click Position, and then place the mouse cursor over the menu to scroll
with the mouse or drag the decode label at the left side of the screen to
adjust the vertical display position of the bus.
âš« Set the label display
Click Label continuously to enable or disable the label display of the LIN
decoding bus. When enabled, the bus label "LIN" will be displayed at the
upper-left side of the bus (when the bus display is enabled).
âš« Event table
Click Event Table to enter the event table setting menu. The event table
displays the detailed decoding information in time order in the form of a
table, so as to better observe the long decoded data. The decoding
information includes the decoded data, the corresponding line number, time,
Loading ...
Loading ...
Loading ...