Loading ...
Loading ...
Loading ...
RIGOL Chapter 11 Protocol Decoding
11-18 DS8000-R User Guide
set the threshold of the MOSI data channel.
Note: MISO and MOSI source channels cannot be both set to "OFF" at
the same time.
5
． Data setting
Click Settings to enter the data setting menu.
âš« Endian setting
Click Endian to select "LSB" or "MSB". By default, it is "MSB".
LSB: indicates Least Significant Bit transmission sequence, i.g. the lowest
bit of the data is transmitted first.
MSB: indicates Most Significant Bit transmission sequence, i.g. the highest
bit of the data is transmitted first.
âš« Polarity setting
Click Polarity continuously to select Positive or Negative as the
polarity for data decoding.
âš« Width setting
Click Width, then use the pop-up numeric keypad or scroll with the mouse
to set the bits of each frame of data. The available range is from 4 to 32. By
default, it is 8.
6． Display-related setting
Click Display to enter the display setting menu.
âš« Set the display format
Click Format to select the display format of the bus data. The available
display formats of the bus data are "Hex", "Dec", "Bin", and "ASCII".
âš« Adjust the vertical position of the bus
Click Position, and then place the mouse cursor over the menu to scroll
with the mouse or drag the decode label at the left side of the screen to
adjust the vertical display position of the bus.
âš« Set the label display
Click Label to enable or disable the label display of the SPI decoding bus.
When enabled, the bus label "SPI-MISO" and/or "SPI-MOSI" will be
displayed at the upper-left side of the bus (when the bus display is
enabled).
âš« Event table
Click Event Table to enter the event table setting menu. The event table
displays the detailed decoding information in time order in the form of a
table, so as to better observe the long decoded data. The decoding
information includes the decoded data (MISO and/or MOSI), the
Loading ...
Loading ...
Loading ...