Loading ...
Loading ...
Loading ...
Chapter 18 Store and Load RIGOL
DS8000-R User Guide 18-3
2. Wave
Click Save Wave to enter the waveform storage setting interface. Save the
main setting information (e.g. "On/Off" state of the channel, vertical scale, and
horizontal time base) and waveform data of all enabled channels to the internal
or external memory.
After selecting this type:
➢ Click Data Source to select "Screen" or "Memory".
➢ Click Format to select the format of the waveform storage, such as "*.bin",
"*.csv", and "*.wfm" (when "Memory" is selected under Data Source).
➢ Click File Name to input the file name to be saved. For filename input,
refer to descriptions in "To Create a Folder". Click Storage → More →
Auto Name to select "ON", then the filename is generated automatically. If
the filename that you input is the same as the existing filename, a prompt
message will be displayed, reminding you that the existing file will be
overwritten and asking you whether to continue or not.
➢ Click Channel, and then the available storage channels include CH1-CH4.
Only when you select "Memory" under Data Source and the format is
"*.bin" or "*.csv", can you set the storage channel.
➢ Click NewFolder to create a new storage folder. For details, refer to
descriptions in "To Create a Folder".
➢ Click Save to save the set waveform file.
➢ Click Window to display or hide the disk management interface. When
"Memory" is selected under Data Source and the format is "*.csv", you
need to click More → Window.
➢ Click More → Time information to enable or disable the display of the
time information in the waveform data. If enabled, the time information for
the waveform data will be displayed. If disabled, the time information for
the waveform data will not be displayed. Only when you select "Memory"
under Data Source and the format is "*.csv", can you set the time
information.
3. Setup
Click Save Setup to enter the setup setting interface. Save the setups of the
oscilloscope to the internal or external memory in "*.stp" format. The stored
setups can be recalled.
After selecting this type:
➢ Click File Name to input the file name to be saved. For filename input,
Tip
After a USB storage device (FAT32 format, flash memory) is connected, you can
control the instrument through the Web Control page. Click Quick at the right
section of the operation interface to save the file. You can select to save to the
internal memory or the external USB storage device. By default, it is saved to the
external memory.
Loading ...
Loading ...
Loading ...