Loading ...
Loading ...
Loading ...
52 MAINTENANCE
Setting Draining
1 Make sure that the water tank is empty.
2 Press Cleaning in the Main Menu screen.
Press Steam Maintenance, then press
Draining.
3 Press the Start/Stop button on the display to
begin Draining. The remaining time appears
in the display.
Using Drying Function
Use the Drying function to dry the oven cavity
after a steam cooking cycle. Drying runs for 20
minutes.
Setting Drying
1 Press Cleaning in the Main Menu screen.
Press Steam Maintenance, then press
Drying.
2 Press the Start/Stop button on the display to
begin Drying. The remaining time appears in
the display.
Periodic Maintenance
Changing the Oven Light
The oven light is a standard LED lamp. If the LED
lamp does not turn on, please contact LG
Electronics Customer Service. Do not attempt to
replace or remove the LED lamp.
Removing, Assembling and
Dismantling the Oven Door
Removing and dismantling the oven door may be
needed to achieve better cleaning performance.
The oven door contains glass that can break. Care
should be taken when removing, assembling and
dismantling the oven door.
CAUTION
• To prevent burns, wait until the oven has cooled
down before touching any of its parts.
• The door is very heavy. Be careful when
removing, lifting and replacing the door.
• Do not lift the door by its handle. The handle is
not designed to support the weight of the door,
doing so can result in serious damage to the
door of the appliance.
• Do not hit the glass with pots, pans, or any other
object.
• Scratching, hitting, jarring or stressing the glass
may weaken its structure, causing an increased
risk of breakage at a later time.
• Do not close the oven door until all the oven
racks are fully in place.
• Wear gloves when handling glass panels to
avoid injury if the glass breaks.
Removing the Oven Door
CAUTION
• Open and close the clamp completely in order to
prevent damaging the oven cavity.
1 Fully open the door.
2 Lift up the door clamp b and flip it towards
the oven
a completely. Repeat on the other
side.
3 Firmly grasp both sides of the door at the top.
4 Partially close the door to approximately 70
degrees d. If the position is correct, the
hinges
c will move freely.
Loading ...
Loading ...
Loading ...