Dji AVATA 2 User Manual

Loading ...

DJI Avata 2 User Manual

Maintenance Instructions

To avoid serious injury to children and animals, observe the following rule:

1. Small parts, such as cables and straps, are dangerous if swallowed. Keep all parts out of

reach of children and animals.

2. Store the Intelligent Flight Battery and remote controller in a cool, dry place away from

direct sunlight to ensure the built-in LiPo battery does NOT overheat. Recommended

storage temperature: between 22° and 28° C (71° and 82° F) for storage periods of more

than three months. Never store in environments outside the temperature range of 14° to

113° F (-10° to 45° C).

3. DO NOT allow the camera to come into contact with or become immersed in water or

other liquids. If it gets wet, wipe dry with a soft, absorbent cloth. Turning on an aircraft that

has fallen in water may cause permanent component damage. DO NOT use substances

containing alcohol, benzene, thinners, or other ammable substances to clean or maintain

the camera. DO NOT store the camera in humid or dusty areas.

4. DO NOT connect this product to any USB interface older than version 3.0. DO NOT connect

this product to any “power USB” or similar devices.

5. Check every aircraft part after any crash or serious impact. If there are any problems or

questions, contact a DJI authorized dealer.

6. Regularly check the Battery Level Indicators to see the current battery level and overall

battery life. The battery is rated for 200 cycles. It is not recommended to continue use

afterward.

7. After-Flight Checklist

a. Make sure the Intelligent Flight Battery and the propellers are in good condition.

b. Make sure that the camera lens and Vision System sensors are clean.

c. Make sure to attach the gimbal protector before storing or transporting the aircraft.

8. Make sure to transport the aircraft with the arms folded when powered o.

9. Make sure to transport the remote controller with antennas folded when powered o.

10. The battery will enter sleep mode after long-term storage. Charge the battery to exit from

sleep mode.

11. Use the ND lter if the exposure time needs to prolonged. Refer to the product information

on how to install the ND lters.

12. Store the aircraft, remote controller, battery, and charger in a dry environment.

13. Remove the battery before servicing the aircraft (e.g., cleaning or attaching and detaching

the propellers). Make sure that the aircraft and the propellers are clean by removing any

dirt or dust with a soft cloth. Do not clean the aircraft with a wet cloth or use a cleanser that

contains alcohol. Liquids can penetrate the aircraft housing, which can cause a short circuit

and destroy the electronics.

14. Make sure to turn o the battery to replace or to check the propellers.

Loading ...

Dji AVATA 2