Dji AVATA 2 User Manual

Loading ...

DJI Avata 2 User Manual

Press and hold the power button on the goggles until the goggles start to beep

continuously and the battery level LEDs start to blink in sequence.

Press and hold the power button on the motion controller until it starts to beep

continuously and the battery level LEDs start to blink in sequence.

Once linking is successful, the goggles and the motion controller stop beeping and both

the battery level LEDs turn solid and display the battery level.

• Make sure the devices are within 0.5 m of each other during linking.

• Restart the devices if the devices fail to link. Connect the goggles to a mobile

device, run the DJI Fly app, select Connection Guide, and then follow the on-screen

instructions to link.

• The aircraft can be controlled with only one remote control device during flight. If

your aircraft has been linked with multiple remote control devices, turn o the other

remote control devices before ight.

2. Linking the goggles and motion controller:

DJI Fly

App

Activation

DJI Avata 2 must be activated before using for the rst time. Make sure all devices are linked

after powering on the aircraft, goggles, and remote control device. Connect the USB-C port of

the goggles to the mobile device, run DJI Fly, and follow the prompts to activate. An internet

connection is required for activation. If automatic binding fails, follow the on-screen prompts

on DJI Fly to bind the aircraft and goggles. The aircraft and goggles must be bound to receive

service under warranty.

• The goggles only support standard USB-C protocols and MFi-certified Lightning

cables. Non-standard cables are not supported. If the devices do not respond after

connecting, use a dierent data cable and try again.

Loading ...

Dji AVATA 2