Dji AVATA 2 User Manual

Loading ...

DJI Avata 2 User Manual

1. Battery Port

2. USB-C Port

3. Function Button

4. Status LED

Charging Intelligent Flight Batteries

1. Insert the batteries into the charging hub until it clicks into place.

2. Connect the charging hub to a power outlet using a USB-C charger. The Intelligent Flight

Battery with the highest power level will be charged rst, and then the rest will be charged in

sequence according to their power levels. The status LED indicates the battery level during

charging. Refer to the Status LED Indicator Descriptions for more information about the

blinking patterns of the status LED indicator. Press the function button to check the battery

level of the inserted batteries.

3. The battery can be stored in the charging hub after charging. Remove the battery from the

charging hub for use.

• When using the charging hub to charge the Intelligent Flight Batteries, it is

recommended to use the DJI 65W Portable Charger or a USB Power Delivery charger.

When used with the DJI 65W Portable Charger, the charging hub can fully charge one

Intelligent Flight Battery in approximately 45 minutes.

• The charging hub is only compatible with the BWX520-2150-14.76 Intelligent Flight

Battery. DO NOT use the charging hub with other battery models.

• Place the charging hub on a at, stable surface with good ventilation when charging

an external device or accumulating power. Make sure the device is properly insulated

to prevent re hazards.

• DO NOT touch the metal terminals on the battery ports. Clean the metal terminals

with a clean, dry cloth if there is any noticeable buildup.

• Make sure to charge batteries with low battery power in time. It is recommended to

store the batteries in the charging hub.

Click

100%

Loading ...

Dji AVATA 2