Loading ...
Loading ...
Loading ...
AXIS Q7424–R0N,,
System Options
The following traps are av aila ble :
•Coldstart
•Warmstart
•Linkup
• Authentication failed
SNMP v3 provides encryption and secure passwords. To use traps with SNM P v3, an SNMP v3 management application is required.
To use SNMP v3, HTTPS must be enabled, see
HTTPS, on page 37
. To enable SNMP v3, check the bo x and provide the initial user
password.
Note
The initial password can only be set once. If the password is lo st, the Axis prod uct must be reset to factory default, see
Reset to Factory Default Settings, on page 47
.
UPnP
TM
The Axis product includes supp ort for UPnP
TM
.UPnP
TM
is enabled by default and the product is automatically detected by operating
systems and clients that support this protocol.
UPnP
TM
can be disable d under System Options > Network > UPnP
TM
.
RTP/H.264
The RTP port range and multicast settings are co nfig u red under System Options > Network > RTP.
The RTP port range defines the range of ports from which the video/audio ports are auto
matically selected. For multicast streams,
only certain IP addresses and port numbers should be used.
Select Always Multicast Video and/or Always M ulticast Audio to start multicast streami n g witho ut open ing an RTSP session.
Bonjour
The Axis product includes support for Bonjour. Bonjo ur is enabled by default and the prod uct is automatically detected by operating
systems and clients that support this protoc
ol.
Bonjour can be disabled under System Op
tions > Network > Bonjour.
Storage
SD Card
NOTICE
To prevent corruption of recordings, the SD card should always be unmounted b efore it is ejected.
The Axis product supports SD cards with the follow ing file systems:
• ext4 — recom m e nde d due to its resilience against data loss if the card is ejected or if there is a brupt power loss. To access
data stored on the card from the Windows operating system, a third-party ext4 driver or application is required.
• vFAT — most SD cards are pre-formatted with vFAT when purchased.
If required, the SD card can b e re-formatted to the desired file system. To format the SD card:
1. Insert the SD card in the SD card slot.
2. Go to System Options > Storage and click SD Card.
43
Loading ...
Loading ...
Loading ...