Loading ...
Loading ...
Loading ...
AXIS Q7424–R0N,,
System Options
To change the date and time settings, select the preferred Time mode under New Server Time:
• Synchronize with computer time sets date and time according to the com puter’s clock. With this option, date and
time are set once and will not be updated automatically.
• Synchronize with NTP Server o btains date and time from an NTP server. Wi th this option, date and time settings are
updated continuously. For information on NTP settings, see
NTP Configuration, on page 40
.
If using a host name for the NTP server, a DNS server must be configured. See
DNS Configuration, on page 40
.
• Set manually allows you to manuall y set date and ti m e.
If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving
time changes.
The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the
predefined formats or see
File Naming & Date/Time Formats
in the online help for information on how to create custom date and
time formats. To include date and time in the overlay text, go to Video & Audio and sele ct Include date and Include time.
Network
Basic T CP/IP Settings
The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one version
must always be enabled.
IPv4 Address Configuration
By default, the Axis p roduct is set to use IPv4 (IP version 4) and to obtain the IP ad dress automatically via DHCP. The IPv4 settings are
configured under System Options > Network > TCP/IP > Basic.
DHCP (Dynamic Host Configuration Protocol) allows network administrators to centrally manage and automate the assignment of
IP addresses. DHCP should only be enabled if using dynamic IP address notification, or if the DHCP can upda te a DNS server. It is
then possible to access the Axis product by name (host name).
If DHCP is enabled and the product cannot be accesse d, run AXIS IP Utility to search the network for connecte d Axis products, or reset
the product to the factory default settings (see
page 47
) and then perform the installation again.
To use a static IP address, check Use the following IP address and specify the IP address, subnet mask and default router.
IPv6 Address Configuration
If IPv6 (IP version 6) is enabled, the Axis product will receive an IP address according to the configuration in the network router.
To enab le IPv6, go to System Options > Network > TCP/IP > B asic. Other settings for IPv6 should be configured in the network router.
ARP/Ping
The IP address can be set using ARP and Ping . For instructions, see the product’s Installation Guide.
ARP/Ping is enabled by defau lt. To disable, uncheck the box under System Options > Network > TCP/IP > Basic.
The ARP/ Ping service is a utomatically disabled two minute s after the product is started, or as soon as an IP address is set. To r eset the
IP address, the product must be restarted to activate ARP/Ping f or an additional tw o minutes.
Pinging the product is still possible when this service is disabled.
39
Loading ...
Loading ...
Loading ...