Loading ...
Loading ...
Loading ...
AXIS Q7424–R0N,,
Events
Events
The Axis product can be configure d to perform actions whe n di ffe rent e ven ts occur, for e xample, start a record ing wh e n motion is
detected. The set of conditions that defines how and when the action is triggered is called an Action Rule.
Available Action Rule triggers and conditions include:
• Applications — use installed a pplications to trigger the rule, see
Applications, on page 28
.
• Detectors
- Audio Detection — trigger the rule when audio is detected, see
Audio Detection, on page 30
.
- Motion Detection — trigger the rule when motion is detected, s ee
Motion Detection, on page 29
.
- Tampering — tr igge r the rule wh en tampering is detected , se e
Camera Tampering, on page 29
.
• Hardware
- Video Signal — trigger the rule if vide o signal is los t.
- Network — trigger the rule if network connection is lost or restored. This can for example b e used to start
recording to the SD card.
• Input Signal
- Digital Input Port — trigger the rule when an I/O port receives a signal from a connected device, see
I/O
Ports, o n page 44
.
- Manual Trigger — trigger the rule using the Manual Trigger button in the Live View page, see
Controls on the
Live View Page, on page 9
. This can for example be used to validate actions d
uring pro duct installation
and configuration.
• PTZ
- Moving — trigger the rule when the cam era view moves due to a PTZ operation. This can for example be used
as an additi onal condition to prevent an action rule triggered by motion detection to record video while the
camera view moves due to a P TZ operation.
- Preset Reached —triggertheru
le when the camera stops at a preset position. This can be for example be used
with the Send Images action to upload images from the p reset position.
• Storage
- Available — trigger the rule when the storage device is unmounted or removed. This can for example be
used to send maintenance notifications.
- Full — trigger the rule when the s torag e d evice is full. Under normal op era tion, the oldest recordings will be
overw
ritten to prevent the storage device from becoming full.
- L
ocked — trigger the rule if the storage device is locked (write protected).
- Storage read only —thefile system is broken or the lock switch on the SD card is in locked position
• System
- System Initializing — trigge r the rule when the p roduct is being started. Thi s can for example be used to send a
notification when the product restarts.
• Time
- Recurrence — trigger the rule periodically, see
Recurrences, on page 33
. This can for example be used to
upload an image every 5 m inutes .
31
Loading ...
Loading ...
Loading ...