Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/35306437-0742-001-eol/bg20.png)
AXIS Q7424–R0N,,
Events
- Use Schedule — trigger the rule according to the selected schedule , see
Schedules, on page 33
.
Available actions include:
• Output Port — activate an I/O port to control an external device.
• Play Audio Clip —see
Audio Clips, on page 21
.
• PTZ Control
- Preset Position — go to a preset position.
- Guard Tour — start a guard tour, see
Guard T our, on page 26
.
• Record Video — record video to a selected storage.
• Send Images —sendimagestoarecipient.
• Send Notifications —sendanotificatio n message to a recipient.
• Status LED — flash the LED indicator. This can for example be used to validate triggers such as motion detection during
product installation a nd configuration.
Setting Up an Action Rule
An action rule defines the conditio ns that must be met fo r the product to pe rfo rm an action, for example record video or send email
notifications. If multiple conditions ar e defined, all must be met to trigger the action.
The following example describes how to set up an action rule to record video to a network share if there is mo vement in the
camera’s field of view.
Set up motion detection and add a network share:
1. Go to Detectors > Mo tion Detection and configure a motion detection window, see
2. Go to System Options > Storage and set up the network share, see
page 44
.
Set up the action rule:
1. Go to Events > Action Rules and click Add.
2. Select Enable rule and e nter a d escriptive name for the rule.
3. Select Detectors from the Trigger drop-d own list.
4. Select M otion Detection from the drop-down list. Select the motion detection window to use.
5. Optionally, select a Schedule and Additional conditions,seebelow.
6. Under Actions, select Record Video from the Type drop-down list.
7. Select a Stream profile and configure the Duration settings as described below .
8. Select Network Share from the Storage drop-down list.
To add additional criteria, select the Additional conditions option and add additional triggers. To prevent an action from being
triggered repeatedly, a Wait at least time can b e set. Enter the time in hours, minutes and seconds, during which the trigger
should be ignore d before the a c ti on rule can be activated again.
The recording Duration of some actions can be set to include time immediately before and after the event. Select Pre-trigger time
and/or Post-trigger time and enter the number of seconds. When While the rule is active is enabled and the action is triggered
again during the post-trigger time, the recording time will be extended w ith another post-trigger time period.
For m ore information, see the online help
.
32
Loading ...
Loading ...
Loading ...