Loading ...
Loading ...
Loading ...
AXIS P1465-LE-3 License Plate Verifier Kit
The device interface
IR-cut lter:
• Auto: Select to automatically turn on and off the IR-cut lter. When the camera is in day mode, the IR-cut lter
is turned on and blocks incoming infrared light, and when in night mode, the IR-cut lter is turned off and the
camera’s light sensitivity increases.
• On: Select to turn on the IR-cut lter. The image is in color, but with reduced light sensitivity.
• Off: Select to turn off the IR-cut lter. The image is in black and white for increased light sensitivity.
Threshold: Use the slider to adjust the light threshold where the camera changes from day mode to night mode.
• Move the slider towards Bright to decrease the threshold for the IR-cut lter. The camera changes to night mode
earlier.
• Move the slider towards Dark to increase the threshold for the IR-cut lter. The camera changes to night mode later.
IR light
If your device doesn’t have built-in illumination, these controls are only available when you have connected a supporting Axis
accessory.
Allow illumination: Turn on to let the camera use the built-in light in night mode.
Synchronize illumination: Turn on to automatically synchronize the illumination with the surrounding light. The synchronization
between day and night only works if the IR-cut lter is set to Auto or Off.
Automatic illumination angle
: Turn on to use the automatic illumination angle.
Illumination angle : Use the slider to manually set the illumination angle, for example if the angle needs to be different
from the camera’s angle of view. If the camera has a wide angle of view, you can set the illumination angle to a narrower angle,
which equals a greater tele position. This will result in dark corners in the image.
IR wavelength
: Select the desired wavelength for the IR light.
White light
Allow illumination : Turn on to let the camera use white light in night mode.
Synchronize illumination
: Turn on to automatically synchronize the white light with the surrounding light.
Exposure
Exposure mode: Select an exposure mode to reduce rapidly changing irregular effects in the image, for example icker produced
by different types of light sources. We recommend you to use the automatic exposure mode, or the same frequency as your
power network.
• Automatic: The camera adjusts the aperture, gain and shutter automatically.
• Automatic aperture
: The camera adjusts the aperture and gain automatically. The shutter is xed.
• Automatic shutter
: The camera adjusts the shutter and gain automatically. The aperture is xed.
• Hold current: Locks the current exposure settings.
• Flicker-free
: The camera adjusts the aperture and gain automatically, and uses only the following shutter
speeds: 1/50 s (50 Hz) and 1/60 s (60 Hz).
• Flicker-free 50 Hz
: The camera adjusts the aperture and gain automatically, and uses the shutter speed 1/50 s.
42
Loading ...
Loading ...
Loading ...