Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/67207942-02811-001/bg17.png)
AXIS P1465-LE-3 License Plate Verifier Kit
Vehicle entry and exit scenario
Vehicle entry and exit scenario
In the scenario for vehicle entry and exit, the application reads the vehicle license plate captured by the camera and veries the
license plate against a list of authorized or unauthorized license plate numbers stored in the camera.
This scenario requires the application embedded in a camera with I/O support or a connected I/O relay module to open and close the
barrier.
Two possible setups for the vehicle entry and exit scenario.
1
Axis camera with AXIS License Plate Verier
2
I/O communication
3
Barrier
4
Axis I/O relay module
5
IP communication
Open a barrier for known vehicles using a relay module
This example use case explains how to set up AXIS License Plate Verier together with a relay module to open a barrier for a known
vehicle driving through a specic region of interest (ROI) into, let’s say a parking area.
Requirements:
• Camera physically installed and connected to the network.
• AXIS License Plate Verier up and running on the camera.
• Cables connected between the barrier and the relay module.
• Basic setup done. See Basic setup on page 4 .
1. Go to the camera’s webpage, select Settings and open AXIS License Plate Verier.
2. Go to the relay module’s webpage and make sure the relay port is connected to the camera’s I/O port.
3. Copy the relay module’s IP address.
4. Go back to AXIS License Plate Verier.
23
Loading ...
Loading ...
Loading ...