Loading ...
Loading ...
Loading ...
Setting IPv6 Addresses
8W0J-01L
In an IPv6 environment, you can set the following IPv6 addresses and use them at the same time.
● Link-Local Addr
ess
An address that can only be used within the same link. It cannot be used to communicate with devices beyond
a router.
A link-local address is automatically set when usage of IPv6 addresses is enabled.
● Stateless Address
An address that is generated automatically using the network prex provided by the router and the MAC
address of the machine.
This address is discarded when the machine is restarted or turned ON.
● Manual Address
An address that is entered manually by specifying the IP address, prex length, and default router address.
● Stateful Address
An address obtained from a DHCP server using DHCPv6.
This section describes how to congure the settings using Remote UI from a computer.
On the control panel, select [Menu] in the [Home] screen, and then select [Preferences] to congure the settings. You
cannot use the control panel to congure some of the settings.
[IPv6 Settings](P. 446)
Administr
ator privileges are required. The machine must be restarted to apply the settings.
Required Preparations
● Set an IPv4 addr
ess to the machine.
Setting IPv4 Addresses(P. 77)
● In an IPv6 envir
onment, you cannot use the function for scanning originals and saving the data to a
computer.
1
Log in to Remote UI in System Manager Mode.
Starting Remote UI(P. 399)
2
On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of
Remote UI(P
. 401)
3
Click [Network Settings]
[IPv6 Settings] [Edit].
➠ The [Edit IPv6 Settings] scr
een is displayed.
4
In [IP Address Settings], select the [Use IPv6] checkbox.
5
Set the IPv6 address to use.
Setting Up
81
Loading ...
Loading ...
Loading ...