Loading ...
Loading ...
Loading ...
SDS5000X Series Digital Oscilloscope User Manual
Continue with the example in the section above. In Sequence mode, all
waveforms that satisfy the trigger conditions are mapped to the display. If you
need to observe a single frame, you can use history mode.
To enable history mode, touch the Frame No. area twice, then the virtual
numeric keypad pops up. Input the number "5412" to specify the 5412th
segment (frame).
Observing the 5412th frame captured by Sequence in history mode
Touch the List area, turn on the list, in which the time label corresponding to the
5412th waveform is displayed. The time resolution is microseconds. Time label
types includes AcqTime or Delta T, AcqTime corresponds to the absolute time
of the frame, synchronized with the real-time clock of the oscilloscope; Delta T
is the acquisition time interval between adjacent two frames, it is shown as
50msin the following diagram, which is consistent with the period of the actual
waveform.
Loading ...
Loading ...
Loading ...