Loading ...
Loading ...
Loading ...
SDS5000X Series Digital Oscilloscope User Manual
This symbol shows that the switch is an On/Standby switch. When it
is pressed, the scope’s state switches between Operation and
Standby. This switch does not disconnect the device's power supply.
To completely power off the scope, the power cord must be
unplugged from the AC socket after the oscilloscope is in the
standby state.
This symbol is used to represent alternating current, or "AC".
CAUTION
The "CAUTION" symbol indicates a potential hazard. It calls
attention to a procedure, practice or condition which may be
dangerous if not followed. Do not proceed until its conditions are fully
understood and met.
WARNING
The "WARNING" symbol indicates a potential hazard. It calls
attention to a procedure, practice or condition which, if not followed,
could possibly cause bodily injury or death. If a WARNING is
indicated, do not proceed until the safety conditions are fully
understood and met.
2.3 Working Environment
The design of the instrument has been verified to conform to EN 61010-1 safety
standard per the following limits:
Environment
This instrument is intended for indoor use and should be operated in a clean,
dry environment.
Ambient Temperature
Operating: 0 ℃ to +40 ℃
Non-operation: -20 ℃ to +60 ℃
Note: Direct sunlight, radiators, and other heat sources should be taken into
account when assessing the ambient temperature.
Loading ...
Loading ...
Loading ...