Siglent SDS-5000X-FG User Manual

Loading ...

SDS5000X Series Digital Oscilloscope User Manual

Note: In Auto mode, if the signal satisfies the trigger conditions but cannot

trigger the oscilloscope stably, it may be that interval between two trigger

events exceeds the timeout period. Try Normal mode in this case.

Normal：Triggers and acquisitions only occur when the trigger conditions are

met. Otherwise, the oscilloscope holds the last waveform on the display and

waits for the next trigger. Normal mode is suitable for acquiring:

 Only events specified by the trigger settings

 Rare events

Single ： Captures and displays a single frame which satisfies the trigger

conditions, and then stops. The following trigger events are ignored until the

Single acquisition is restarted. Single mode is suitable for:

 One-shot events or periodic signals, such as power-on\off waveforms

on a power rail

 Rare events

15.5 Trigger Type

15.5.1 Overview

The trigger modes of the SDS5000X are digital designs. Compared with analog

trigger circuits, digital triggers can not only greatly optimize trigger precision,

trigger jitter, but also support multiple trigger types and complex trigger

conditions.

Loading ...

Siglent SDS-5000X-FG Waveform Generator Software