Loading ...
Loading ...
Loading ...
SDS5000X Series Digital Oscilloscope User Manual
16.7 FlexRay Trigger and Serial Decode
This section covers triggering and decoding FlexRay signals. Please read the
following for more details: " FlexRay Signal Settings", " FlexRay Trigger" and "
FlexRay Serial Decode".
16.7.1 FlexRay Signal Settings
Connect the FlexRay signal to the oscilloscope, and then set the threshold level
of the signal. The process of specifying the source and threshold is similar to "
I2C Signal Settings".
In BusConfig menu of trigger and decode, the baud rate can be set to: 2.5 Mb/s,
5.0 Mb/s, 10.0 Mb/s or Custom.
The method of copying settings is the same as I2C signal settings. See " I2C
Signal Settings" for details.
16.7.2 FlexRay Trigger
Touch Trigger Setting in the
FlexRay trigger dialog box to
set the trigger conditions：
 TSS— The oscilloscope triggers on the transmission start sequence.
Loading ...
Loading ...
Loading ...