Siglent SDS-5000X-FG User Manual

Loading ...

SDS5000X Series Digital Oscilloscope User Manual

If you set the trigger condition to Slow Channel:

 ID can be selected in the hexadecimal range of

0x0 to 0xF (short serial / enhanced serial with 4

bits ID）or 0x00 to 0xFF（enhanced serial with 8

bits ID）. If it is selected as "0xXX", the ID is

ignored.

 Compare Type can be specified as Equal, Not

Equal, Less than, Less or Equal, Greater than,

Greater or Equal, in Range of, out of Range.

 Data can be selected in the hexadecimal range

of 0x00 to 0xFF (short serial ） or 0x0000 to

0xFFFF（enhanced serial with 4 bits ID）or 0x000

to 0Xfff(enhanced serial with 8 bits ID). If it is

selected as "0xXX", the data is ignored.

Error — the oscilloscope triggers on the error frame. Errors include Successive

Sync Pulses Error，Pulse Period Error, Fast Channel CRC Error, Slow Channel

CRC Error, All CRC Errors.

 Successive Sync Pulses Error: triggers on a sync pulse whose width varies

from the previous sync pulse's width by greater than 1/64 (1.5625%, as

defined in the SENT specification).

 Pulse Period Error: triggers if a nibble is either too wide or too narrow (for

example, data nibble < 12 (11.5) or > 27 (27.5) ticks wide). Sync, S&C, data,

or checksum pulse periods are checked.

 Fast Channel CRC Error：triggers on any Fast Channel Message CRC error.

Loading ...

Siglent SDS-5000X-FG Waveform Generator Software