Loading ...
Loading ...
Loading ...
SDS5000X Series Digital Oscilloscope User Manual
Perform Analysis> Mask Test to open the Mask Test dialog box:
A. Turn on/off the test
B. Select the source（C1~C4）
C. Select the rule（All In, All Out, Any In
and Any Out）
D. Set the mask
E. Turn on/off the Pass/Fail operation.
Turning off the operation when the
test is in progress will stop the test
immediately, and the counters in the
information display area will stop.
Turn on the operation again re-starts
the test and all the counters are
cleared. Pressing the Clear Sweeps
button on the front panel is equivalent.
F. Turn on/off the information display
G. Turn on/off “Stop on Fail”. When it is
"on", the oscilloscope stops the
acquisition once it detects a failure
H. Turn on/off “Failure to History”. When
it is "on", the failure frame will be
stored internally and can be viewed
through history function
I. Turn on/off “Capture on Fail”. When it
is "on", the failure waveform is
detected, the screenshot with failure
Loading ...
Loading ...
Loading ...