Loading ...
Loading ...
Loading ...
SDS5000X Series Digital Oscilloscope User Manual
16.5 CAN Trigger and Serial Decode
This section covers triggering and decoding CAN signals. Please read the
following for more details: " CAN Signal Settings", " CAN Trigger" and " CAN
Serial Decode".
16.5.1 CAN Signal Settings
Connect the CAN_H and CAN_L signals to the oscilloscope, set the mapping
relation between channels and signals, and then set the threshold level of each
signal. The process of specifying the source and threshold is similar to " I2C
Signal Settings".
In BusConfig menu of trigger and decode, baud rate can be set to: 5 kb/s, 10
kb/s, 20 kb/s, 50 kb/s, 100 kb/s, 125 kb/s, 250 kb/s, 500 kb/s, 800 kb/s, 1 Mb/s
or Custom.
The method of copying settings is the same as I2C signal settings. See " I2C
Signal Settings" for details.
Loading ...
Loading ...
Loading ...