Loading ...
Loading ...
Loading ...
SDS5000X Series Digital Oscilloscope User Manual
The power cord should be unplugged from the AC outlet if the scope is not to
be used for an extended period of time.
CAUTION: The outer shells of the front panel terminals (CH1, CH2,
CH3, CH4, EXT) are connected to the instrument’s chassis and
therefore to the safety ground.
2.6 Cleaning
Clean only the exterior of the instrument, using a damp, soft cloth. Do not use
chemicals or abrasive elements. Under no circumstances allow moisture to
penetrate the instrument. To avoid electrical shock, unplug the power cord
from the AC outlet before cleaning.
Warning: Electrical Shock Hazard!
No operator serviceable parts inside. Do not remove covers.
Refer servicing to qualified personnel
2.7 Abnormal Conditions
Do not operate the scope if there is any visible sign of damage or has been
subjected to severe transport stresses.
If you suspect the scope’s protection has been impaired, disconnect the
power cord and secure the instrument against any unintended operation.
Proper use of the instrument depends on careful reading of all instruction and
Loading ...
Loading ...
Loading ...