Loading ...
Loading ...
Loading ...
SDS5000X Series Digital Oscilloscope User Manual
32.6 I/O Setting
32.6.1 LAN
Operate the following steps to set the LAN port:
Perform Utility>System Setting>I/O Setting>LAN Config to open the LAN
Config dialog box.
A. Check Automatic (DHCP) to
enable dynamic IP. In this case
the oscilloscope must be
connected to the local area
network with a DHCP server.
Contact your network
administrator to confirm the
relevant information.
B. When is not checked, the
oscilloscope uses static IP. Set
the static IP address, subnet
mask, and gateway separately.
C. When accessing more than two
SIGLENT instruments through the
web browser, it is necessary to
set a different VNC port number
for each instrument. The range is
from 5900 to 5999.
D. MAC address of the oscilloscope,
read only.
Loading ...
Loading ...
Loading ...