Loading ...
Loading ...
Loading ...
Using the MIDI Recorder to Record
EN-96
Use the procedure below to edit an entire song (all of the
tracks included in the song) in measure units.
• In the procedure below, you specify a start measure (Point
A or simply Point), and an end measure (Point B). The
section specified by the procedure under “Looping
Playback of Specific Song Measures (A-B Repeat)” (page
EN-39) is used as the initial default for these settings.
• Performing this operation makes the measures within the
specified range blank measures. It does not affect the total
number of measures in the song.
1.
Perform the procedure under “To enter the
Song Editing Mode” (page EN-95).
2.
Press the [6] (ENTER) bm number key.
This displays “Clear”.
3.
Press [6] (ENTER) again.
This displays “Point A”.
4.
Use bn [–] and [+], or the bl dial to select the
number of the first measure of the range you
want to clear, and then press [6] (ENTER).
This displays “Point B”.
5.
Use bn [–] and [+], or the bl dial to select the
number of the last measure of the range you
want to clear, and then press [6] (ENTER).
This displays “Sure?”
6.
Perform the procedure under “To exit the Song
Editing Mode operation” (page EN-95).
1.
Perform the procedure under “To enter the
Song Editing Mode” (page EN-95).
2.
Press the [6] (ENTER) bm number key.
This displays “Clear”.
3.
Use the [1] (V) and [3] (W) bm number keys
to display “Copy”, and then press [6] (ENTER).
This displays “Point A”.
4.
Use bn [–] and [+], or the bl dial to select the
number of the first measure of the range you
want to copy, and then press [6] (ENTER).
This displays “Point B”.
5.
Use bn [–] and [+], or the bl dial to select the
number of the last measure of the range you
want to copy, and then press [6] (ENTER).
This displays “DstPoint”.
6.
Use bn [–] and [+], or the bl dial to select the
number of the first measure of the copy
destination, and then press [6] (ENTER).
This displays “Sure?”
7.
Perform the procedure under “To exit the Song
Editing Mode operation” (page EN-95).
1.
Perform the procedure under “To enter the
Song Editing Mode” (page EN-95).
2.
Press the [6] (ENTER) bm number key.
This displays “Clear”.
3.
Use the [1] (V) and [3] (W) bm number keys
to display “Insert”, and then press [6] (ENTER).
This displays “Point”.
4.
Use bn [–] and [+], or the bl dial to select the
measure from which you want to insert blank
measures, and then press [6] (ENTER).
This displays “Length”.
5.
Use bn [–] and [+], or the bl dial to specify the
number of blank measures you want to insert,
and then press [6] (ENTER).
This displays “Sure?”
6.
Perform the procedure under “To exit the Song
Editing Mode operation” (page EN-95).
Editing an Entire Song in Measure
Units (Song Editing)
To clear a specific range of measures within
a song
To copy an entire song in measure units and
insert them into a specified location of the
same song
To insert blank measures at a specified
location in a song
CT-X9000_8000IN_EN.book 96 ページ ２０１８年４月１２日 木曜日 午後１時８分
Loading ...
Loading ...
Loading ...