Loading ...
Loading ...
Loading ...
EN-31
Controlling Sounds
■ Pedal Function List ■ Connectable Expression Pedals
You can connect a commercially available expression pedal
that satisfies the specifications below to the fp PEDAL2/
EXPRESSION jack. Use of a pedal whose operation has
been confirmed (see below) is recommended.
• Maximum resistance value: 10kΩ±20% to 50kΩ±20%
• Note that pedal polarity depends on the manufacturer. To
configure the pedal polarity type setting, perform the
procedure under “To connect a pedal to the fp PEDAL2/
EXPRESSION jack” (page EN-30).
* Operation Confirmed Pedals
Roland EV-5 (Set minimum volume to 0.)
KURZWEIL CC-1
FATAR VP-25, VP-26
Setting
Value
Function
(Display)
Description
1Sustain
(Sustain)
Sustains notes played while the
pedal is depressed, even if the
keyboard key is subsequently
released.
Organ and other tones that are
sustained as long as keyboard
key are depressed continue to
sound as long as the pedal is
depressed.
2 Sostenuto
(Sostenut)
Only the notes of the keys that
are depressed when the pedal
is pressed are sustained, even
if the keyboard keys are
released, until the pedal is
released.
3 Soft (Soft) Slightly lowers and softens
notes played while the pedal is
depressed.
4 Rhythm/Song
(Rhy/Song)
Starts or stops Auto
Accompaniment or song
playback.
5 Expression
(Exp.)
This function can be selected
only when “2 ExpType1” or “3
ExpType2” is selected in step 6
of the procedure under “To
connect a pedal to the
fp PEDAL2/EXPRESSION
jack” (page EN-30).
With this function, the effect is
applied in accordance with how
far the expression pedal
attached to the fp PEDAL2/
EXPRESSION jack is
depressed.
Exp. Pedal Type 1
Exp. Pedal Type 2*
CT-X9000_8000IN_EN.book 31 ページ ２０１８年４月１２日 木曜日 午後１時８分
Loading ...
Loading ...
Loading ...