Loading ...
Loading ...
Loading ...
Creating an Auto Accompaniment (User Rhythm)
EN-78
1.
Select the built-in rhythm or previously-saved
user rhythm you want to edit.
• See “Selecting a Rhythm” (page EN-42).
2.
Long-press bk FUNCTION until the [EDIT]
indicator appears.
3.
Perform step 3 under “To edit an existing
rhythm and save it” (page EN-76).
4.
Perform step 5 under “To edit an existing
rhythm and save it” (page EN-76).
5.
Perform the procedure under “To configure
mixer settings of a part being edited” (page
EN-80).
6.
Perform steps 4 and 5 for all parts whose mixer
settings you want to configure.
7.
Perform steps 3 through 6 for all
accompaniment patterns whose mixer settings
you want to configure.
8.
Save the edited rhythm using the procedure
under “To save a user rhythm” (page EN-83).
• The operation shown here is performed as the steps of the
procedures below.
– Step 8 under “To create a totally new rhythm and save it”
(page EN-75)
– Step 8 under “To edit an existing rhythm and save it”
(page EN-76)
1.
Press 8 RECORD/STOP.
This enters recording standby and displays “Recorded”
or “Empty”.
If “Fixed” is displayed here, it means that the currently
selected part cannot be recorded. After a few seconds,
the display will return to what was shown before you
pressed 8 RECORD/STOP.
• For details about these indicators, see “Part Data
Status Indicators” (page EN-79).
• To exit recording standby, press 8 RECORD/STOP.
This causes the [RECORD] indicator to disappear.
2.
Configure recording settings as desired.
• The settings of recording items that you configured in
the past will still be in effect. Items you have not
changed will be configured with their default settings.
For details about setting items, see the “User Rhythm
Recording Settings” (page EN-80).
• To configure settings, perform the steps below.
(1) Long-press 8 RECORD/STOP until “Quantize”
appears.
(2) Use the [1] (V) and [3] (W) bm number keys to
display the menu for the changes you want to make.
(3) Use bn [–] and [+] or the bl dial to change the
setting value.
(4) When settings are the way you want, press the
8 RECORD/STOP again.
To configure only the mixer settings of an
existing rhythm and save it
To record keyboard play to each part
Flashing
CT-X9000_8000IN_EN.book 78 ページ ２０１８年４月１２日 木曜日 午後１時８分
Loading ...
Loading ...
Loading ...