Loading ...
Loading ...
Loading ...
WARNING!
complete stop, then apply the parking brake, shift
the transmission into PARK, and turn the ignition
OFF. When the ignition is in the OFF position, the
transmission is locked in PARK, securing the
vehicle against unwanted movement.
•
When exiting the vehicle, always make sure the
ignition is in the OFF position, remove the key fob
from the vehicle, and lock the vehicle.
•
Never leave children alone in a vehicle, or with
access to an unlocked vehicle. Allowing children to
be in a vehicle unattended is dangerous for a num-
ber of reasons. A child or others could be seriously
or fatally injured. Children should be warned not to
touch the parking brake, brake pedal or the trans-
mission gear selector.
•
Do not leave the key fob in or near the vehicle (or
in a location accessible to children), and do not
leave the ignition in the ACC or ON/RUN position. A
child could operate power windows, other controls,
or move the vehicle.
CAUTION!
Damage to the transmission may occur if the follow-
ing precautions are not observed:
•
Shift into or out of PARK or REVERSE (R) only after
the vehicle has come to a complete stop.
•
Do not shift between PARK, REVERSE, NEUTRAL,
or DRIVE (D) when the engine is above idle speed.
•
Before shifting into any gear, make sure your foot
is firmly pressing the brake pedal.
IGNITION PARK INTERLOCK
This vehicle is equipped with an Ignition Park Interlock
which requires the transmission to be in PARK (P)
before the ignition can be turned to the OFF position.
This helps the driver avoid inadvertently leaving the
vehicle without placing the transmission in PARK. This
system also locks the transmission in PARK whenever
the ignition is in the OFF position.
NOTE:
The transmission is locked in PARK when the ignition is
in the ACC position (engine will be off).
BRAKE TRANSMISSION SHIFT
INTERLOCK (BTSI) SYSTEM
This vehicle is equipped with a BTSI system that holds
the transmission gear selector in PARK unless the
brakes are applied. To shift the transmission out of
PARK, the engine must be running and the brake pedal
must be pressed. The brake pedal must also be
pressed to shift from NEUTRAL into DRIVE or REVERSE
when the vehicle is stopped or moving at low speeds.
FUEL ECONOMY (ECO) MODE
The Fuel Economy (ECO) mode can improve the vehi-
cle's overall fuel economy during normal driving condi-
tions. Push the ECO button in the center stack of the
instrument panel to enable or disable ECO mode. Or
ECO mode can be enabled or disabled through your
Uconnect system.
When the Fuel Economy (ECO) mode is enabled, the
vehicle control systems will change the following:
•
The transmission will upshift sooner and downshift
later.
•
The overall driving performance will be more
conservative.
•
Some ECO mode functions may be temporarily
inhibited based on temperature and other factors.
8-SPEED AUTOMATIC
TRANSMISSION
The transmission gear range is displayed both on the
gear selector and in the instrument cluster. To select a
gear range, push the lock button on the gear selector
and move the selector rearward or forward. To shift the
transmission out of PARK, the engine must be running
and the brake pedal must be pressed. You must also
press the brake pedal to shift from NEUTRAL into DRIVE
or REVERSE when the vehicle is stopped or moving at
low speeds. Select the DRIVE range for normal driving.
ECO OFF Button
92 STARTING AND OPERATING
Loading ...
Loading ...
Loading ...