Loading ...
Loading ...
Loading ...
CAUTION!
Do not attempt to shift when the drive wheels are
spinning and do not have traction. Damage to the
transmission may occur.
To adjust the Launch RPM, drag the slider bar or press
the arrows on the touchscreen to adjust the holding
RPM. The launch RPM limit is between the minimum
and maximum RPM values shown on the gauge, in
100 RPM increments.
SHIFT LIGHT
Your vehicle is equipped with a Shift Light feature that
illuminates the back light of the tachometer in red
within the instrument cluster display. This feature is a
visual cue to manually up-shift using the paddle shifters
or shifting the transmission gear selector.
To actuate the Shift Light feature, press the Shift Light
button on the touchscreen while in the Race Options
tab, then press the Shift Light On button on the touch-
screen. Activation is shown on the instrument cluster
display.
Once the Shift Light is on, it is only active while the gear
shifter is in the Manual or Sport shifter position (M or S
position).
NOTE:
Paddle Shifters can be used to shift, however using the
Paddle Shifters while the shifter is in Drive (D) position
will not enable the Shift Light feature.
The Shift Light RPM Set-Up allows you to set the Shift
Light to illuminate for gears 1, 2, 3, 4, and 5-6. Pressing
and releasing the Up/Down arrow buttons above and
below each listed gear, the RPM values will change in
increments of 250 RPM. Pressing and holding the
arrows will change the RPM values in increments of
500 RPM, ranging from 6250 RPM. The Shift Light
Setup screen may only be accessed if the feature is
enabled, press the Reset to Factory Default button on
the touchscreen to change back to factory settings, or
press the Deactivate Shift Light button on the touch-
screen to turn the system off completely.
GUIDELINES FOR TRACK USE
•
If your SRT vehicle is equipped with Drive Modes
they will alter the vehicle’s performance in various
driving situations. It is recommended that your
vehicle operates in SPORT or TRACK Modes during
the track event.
•
Prior to each track event, verify all fluids are at the
correct levels.
Launch RPM Set-Up
Shift Light Button Shift Light RPM Set-Up
190 MULTIMEDIA
Loading ...
Loading ...
Loading ...