Loading ...
Loading ...
Loading ...
•
iPhone® 12 (including iPod®) is equipped with soft-
ware to protect the device from overheating. When
the software is active, the rate of charge is slowed
down to protect the device.
•
Phones must always be placed on the wireless
charging pad within the outline shown on the pad so
that its charging parts connect with the charging
coils of the system. Movement of the phone during
charging may prevent or slow the rate of charge.
•
Having multiple applications open on the phone
while charging will reduce the charging efficiency,
and may even shut down an application that is
actively running (i.e. Apple CarPlay®). This may also
cause the phone to overheat.
•
Wireless chargers may implement certain methods
to prevent the phone from overheating during charg-
ing such as slowing down the rate of charge. In cer-
tain instances, the device may shut down for a brief
period of time (when the device reaches a certain
temperature). If this happens, it does not mean
there is a fault with the wireless charging pad. This
may just be a protective measure to prevent dam-
age to the phone.
•
The use of multiple wireless functions at the same
time (wireless charging, Apple CarPlay®, Android
Auto™) could cause the device to overheat, resulting
in limitation of the functions or it turning off. In this
case, it is recommended to connect the system
using the USB port.
•
Do not place the key fob or any other type of metal/
magnetized object inside the mobile phone housing
or near the wireless charging pad.
•
With a compatible device placed on the charging
pad, and the ignition is cycled to the OFF position, a
reminder message may appear on the instrument
cluster display to warn the driver.
CAUTION!
The key fob should not be placed on the charging pad
or within 6 inches (15 cm) of it. Doing so can cause
excessive heat buildup and damage to the fob. Plac-
ing the fob in close proximity of the charging pad
blocks the fob from being detected by the vehicle and
prevents the vehicle from starting.
WINDOWS
POWER WINDOWS
The power window controls are located on the driver's
door trim panel.
The passenger door windows can also be operated by
using the single window controls on the passenger door
trim panel. The window controls will operate only when
the ignition is in the ON/RUN or ACC position.
To open the window part way (manually), push the
switch to the first detent and release it when you want
the window to stop.
The power window controls remain active for up to
10 minutes after the ignition has been placed in the
OFF position. Opening a vehicle front door will cancel
this feature.
WARNING!
Never leave children unattended in a vehicle, and do
not let children play with power windows. Do not leave
the key fob in or near the vehicle, or in a location
accessible to children, and do not leave the ignition
of a vehicle equipped with Keyless Enter ‘n Go™ in
the ACC or ON/RUN position. Occupants, particularly
unattended children, can become entrapped by the
windows while operating the power window switches.
Such entrapment may result in serious injury or
death.
Automatic Window Features
Auto-Down Feature
Both the driver and front passenger window switches
have an Auto-Down feature. Push the window switch
past the first detent, release, and the window will go
down automatically.
To cancel the Auto-Down movement, operate the switch
in either the up or down direction and release the
switch.
Auto-Up Feature With Anti-Pinch Protection — Driver
And Front Passenger Door Only
Lift the window switch fully upward to the second
detent, release, and the window will go up
automatically.
Power Window Switches
60 GETTING TO KNOW YOUR VEHICLE
Loading ...
Loading ...
Loading ...