Loading ...
Loading ...
Loading ...
NOTE:
As a protective measure, the pump will stop if the
switch is held for more than 20 seconds. Once the
switch is released the pump will resume normal
operation.
If the rear wiper is operating when the ignition is placed
in the OFF position, the wiper will automatically return
to the “park” position.
CLIMATE CONTROLS
The Climate Control system allows you to regulate the
temperature, air flow, and direction of air circulating
throughout the vehicle. The controls are located on the
touchscreen and on the instrument panel below the
radio.
AUTOMATIC CLIMATE CONTROL
DESCRIPTIONS AND FUNCTIONS
Max A/C Button
Press and release the MAX A/C button on
the touchscreen to change the current set-
ting to the coldest output of air. The MAX A/C
indicator illuminates when MAX A/C is ON.
Pressing this button or function again will cause the
MAX A/C operation to switch into manual mode and the
MAX A/C indicator will turn off.
In MAX A/C, the blower level and mode position can be
adjusted to desired user settings. Pressing other set-
tings will cause the MAX A/C to exit.
NOTE:
The MAX A/C button is only available on the
touchscreen.
A/C Button
Press and release this button on the touch-
screen to change the current setting. The
A/C indicator illuminates when A/C is on.
The Air Conditioning (A/C) button allows the operator to
manually activate or deactivate the air conditioning sys-
tem. When the air conditioning system is turned on,
cool dehumidified air will flow through the outlets into
the cabin.
NOTE:
If fog or mist appears on the windshield or side glass,
select Defrost mode and increase blower speed if
needed. If your air conditioning performance seems
lower than expected, check the front of the A/C con-
denser (located in front of the radiator), for an accumu-
lation of dirt or insects. Clean with a gentle water spray
from the front of the radiator and through the
condenser.
Recirculation Button
Press and release this button to change the
system between recirculation mode and out-
side air mode. The Recirculation indicator
and the A/C indicator illuminate when the
Recirculation button is pressed. Recirculation can be
used when outside conditions such as smoke, odors,
dust, or high humidity are present. Recirculation can be
used in all modes. Recirculation may be unavailable
(button on the touchscreen grayed out) if conditions
exist that could create fogging on the inside of the wind-
shield. The A/C can be deselected manually without
disturbing the mode control selection. Continuous use
of Recirculation mode may make the inside air stuffy
and window fogging may occur. Extended use of this
mode is not recommended. Recirculation mode may
automatically adjust to optimize customer experience
for warming, cooling, dehumidification, etc.
Uconnect 5/5 NAV With 10.1-inch Display Temperature
Controls
Uconnect 4 With 8.4-inch Display Temperature Controls
GETTING TO KNOW YOUR VEHICLE 47
2
Loading ...
Loading ...
Loading ...