Loading ...
Loading ...
Loading ...
ENGINE FLUIDS AND LUBRICANTS — SRT
Component Fluid, Lubricant or Genuine Part
Engine/Intercooler Coolant
We recommend using Mopar® Antifreeze/Coolant 10 Year/150,000 Mile (240,000 km) Formula OAT (Organic Additive Technology)
that meets the requirements of the manufacturer Material Standard MS.90032.
Engine Oil
We recommend using Mopar® API Certified SAE 0W-40 Full Synthetic Engine Oil which meets the requirements of the manufac-
turer Material Standard MS-12633. Equivalent full synthetic SAE 0W-40 engine oil can be used but must have the API Donut trade-
mark
page 264.
Fuel Selection Premium Unleaded 91 Octane Only or Higher (R+M)/2 method, 0-15% ethanol (Do not use E-85).
CHASSIS FLUIDS AND LUBRICANTS — SRT
Component Fluid, Lubricant, or Genuine Part
Automatic Transmission
Use only Mopar® ZF8&9Speed ATF Automatic Transmission Fluid or equivalent. Failure to use the correct fluid may affect the
function or performance of your transmission.
Transfer Case – Single-Speed We recommend using Mopar® ATF+4 Automatic Transmission Fluid.
Axle Differential (Front) We recommend using Mopar® GL-5 Synthetic Axle Lubricant SAE 75W-85.
Axle Differential (Rear) – With Electronic
Limited-Slip Differential (ELSD)
We recommend using Mopar® GL-5 Synthetic Axle Lubricant SAE 75W-85 with integrated friction modifier.
Brake Master Cylinder
We recommend using Mopar® DOT 3 Brake Fluid, SAE J1703 should be used. If DOT 3 SAE J1703 brake fluid is not available, then
DOT 4 is acceptable.
If using DOT 4 brake fluid, the fluid must be changed every 24 months. This interval is time based only, mileage intervals do not
apply.
306 TECHNICAL SPECIFICATIONS
Loading ...
Loading ...
Loading ...