Loading ...
Loading ...
Loading ...
4. Slide the tire out from under the vehicle and rotate it
vertically behind the rear fascia/bumper.
NOTE:
The vehicle may come equipped with a metal
retainer only when removing the spare
page 293.
5. Pull the metal stamping toward you.
6. Slide the metal stamping up the steel extension
tube and winch cable. Rotate the metal stamping
and push it through the hole of the wheel.
JACKING INSTRUCTIONS —
IF EQUIPPED
WARNING!
Carefully follow these tire changing warnings to help
prevent personal injury or damage to your vehicle:
•
Always park on a firm, level surface as far from the
edge of the roadway as possible before raising the
vehicle.
•
Turn on the Hazard Warning Flashers.
•
Apply the parking brake firmly and set the trans-
mission in PARK.
•
Block the wheel diagonally opposite the wheel to
be raised.
•
Never start or run the engine with the vehicle on a
jack.
•
Do not let anyone sit in the vehicle when it is on a
jack.
(Continued)
Winch Location
Wrench Rotation
Spare Tire
Spare Tire Retainer
Sleeve And Cable
242 IN CASE OF EMERGENCY
Loading ...
Loading ...
Loading ...