Loading ...
Loading ...
Loading ...
AUTO Button
Press and release this button on the touch-
screen, or push the button on the faceplate,
to change the current setting. The AUTO but-
ton automatically controls the interior cabin
temperature by adjusting distribution and amount of
airflow. Air Conditioning (A/C) may be active during
AUTO operation to improve performance. Performing
this function will cause the system to switch between
manual mode and automatic modes. AUTO mode is
highly recommended for efficiency
page 52.
Front Defrost Button
Press and release the touchscreen button,
or push and release the button on the face-
plate, to change the current airflow setting to
Defrost mode. The Front Defrost indicator
illuminates when the Front Defrost is on. Air comes
from the windshield and side window demist outlets.
When the defrost button is selected, the blower level
may increase. Use Defrost mode with maximum tem-
perature settings for best windshield and side window
defrosting and defogging. When toggling the Front
Defrost mode button, the climate system will return to
the previous setting.
Rear Defrost Button
Press and release the button on the touch-
screen, or push and release the button on
the faceplate, to turn on the rear window
defroster and the heated outside mirrors
(if equipped). The Rear Defrost indicator illuminates
when the rear window defroster is on. The rear window
defroster automatically turns off after 10 minutes.
CAUTION!
Failure to follow these cautions can cause damage to
the heating elements:
•
Use care when washing the inside of the rear win-
dow. Do not use abrasive window cleaners on the
interior surface of the window. Use a soft cloth and
a mild washing solution, wiping parallel to the
heating elements. Labels can be peeled off after
soaking with warm water.
•
Do not use scrapers, sharp instruments, or abra-
sive window cleaners on the interior surface of the
window.
•
Keep all objects a safe distance from the window.
Driver And Passenger Temperature
Buttons
These buttons provide the driver and passenger with
independent temperature control.
Push the Up button on the faceplate or press
and slide the temperature bar towards the
red arrow button on the touchscreen for
warmer temperature settings.
Push the Down button on the faceplate or
press and slide the temperature bar towards
the blue arrow button on the touchscreen for
cooler temperature settings.
SYNC Button
Press the SYNC button on the touchscreen
to toggle the SYNC feature on/off. The SYNC
indicator illuminates when SYNC is on. SYNC
is used to synchronize the front passenger
temperature and rear passenger temperature, mode,
and blower settings with the driver temperature, mode,
and blower settings. Changing the front passenger tem-
perature or rear passenger temperature, mode, and
blower settings while in SYNC will automatically exit this
feature.
NOTE:
The SYNC setting is only available on the touchscreen.
Blower Control
Blower Control is used to regulate the
amount of air forced through the Climate
Control system. There are seven blower
speeds available. Adjusting the blower will
cause automatic mode to switch to manual operation.
The speeds can be selected using either the blower
control knob on the faceplate or the buttons on the
touchscreen.
•
Faceplate: The blower speed increases as you turn
the blower control knob clockwise from the lowest
blower setting. The blower speed decreases as you
turn the blower control knob counterclockwise.
•
Touchscreen: Use the small blower icon to reduce
the blower setting and the large blower icon to
increase the blower setting. Blower speed can also
be selected by pressing the blower bar area
between the icons.
48 GETTING TO KNOW YOUR VEHICLE
Loading ...
Loading ...
Loading ...