Loading ...
Loading ...
Loading ...
TOWING TIPS
Before towing, practice turning, stopping, and backing
up the trailer in an area located away from heavy traffic.
Automatic Transmission
Select the DRIVE (D) range when towing. The transmis-
sion controls include a drive strategy to avoid frequent
shifting when towing. However, if frequent shifting does
occur while in DRIVE, you can use the AutoStick shift
control to manually select a lower gear.
If equipped with Tow N Go, it is recommended to place
the vehicle in tow mode by pushing the TOW button.
NOTE:
Using a lower gear while operating the vehicle under
heavy loading conditions, will improve performance and
extend transmission life by reducing excessive shifting
and heat buildup. This action will also provide better
engine braking.
AutoStick
•
When using the AutoStick shift control, select the
highest gear that allows for adequate performance
and avoids frequent downshifts. For example,
choose “5” if the desired speed can be maintained.
Choose “4” or “3” if needed to maintain the desired
speed.
•
To prevent excess heat generation, avoid continuous
driving at high RPM. Reduce vehicle speed as nec-
essary to avoid extended driving at high RPM.
Return to a higher gear or vehicle speed when grade
and road conditions allow.
Cruise Control — If Equipped
•
Do not use on hilly terrain or with heavy loads.
•
When using the Cruise Control, if you experience
speed drops greater than 10 mph (16 km/h), disen-
gage until you can get back to cruising speed.
•
Use Cruise Control in flat terrain and with light loads
to maximize fuel efficiency.
Seven-Pin Connector
1 — Backup Lamps
2 — Running Lamps
3 — Left Stop/Turn
4 — Ground
5 — Battery
6 — Right Stop/Turn
7 — Electric Brakes
STARTING AND OPERATING 129
4
Loading ...
Loading ...
Loading ...