Loading ...
Loading ...
Loading ...
WARNING!
page 225 for the location of approved tether
anchorages in your vehicle.
1. Look behind the seating position where you plan to
install the child restraint to find the tether anchor-
age. You may need to move the seat forward to pro-
vide better access to the tether anchorage. If there
is no top tether anchorage for that seating position,
move the child restraint to another position in the
vehicle if one is available.
2. To access the top tether strap anchorages behind
the rear seat, pull the carpeted floor panel away
from the seat back, this will expose the top tether
strap anchorages.
3. Route the tether strap to provide the most direct
path for the strap between the anchor and the child
seat. If your vehicle is equipped with adjustable rear
head restraints, raise the head restraint, and where
possible, route the tether strap under the head
restraint and between the two posts. If not possible,
lower the head restraint and pass the tether strap
around the outboard side of the head restraint.
4. For the center seating position, route the tether
strap over the seatback and headrest then attach
the hook to the tether anchor located on the back of
the seat.
5. Attach the tether strap hook of the child restraint to
the top tether anchorage as shown in the diagram.
Pulling Down The Carpet Floor Panel To Access Top Tether
Strap Anchorage (Five Passenger)
Pulling Down The Carpet Floor Panel To Access Top Tether
Strap Anchorage (6 and 7 Passenger Seating)
Third Row Top Tether Strap Anchorage (6 and 7 Passenger
Seating)
Bench Seat Top Tether Strap Mounting
(5 Passenger Seating)
232 SAFETY
Loading ...
Loading ...
Loading ...