Loading ...
Loading ...
Loading ...
Rear Heated Seats — If Equipped
The two second row outboard seats may be
equipped with heated seats. There are two
heated seat switches that allow the rear pas-
sengers to operate the seats independently.
The heated seat switches for each heater are located
on the rear of the center console.
You can choose from HI, LO, or off heat settings. Amber
indicator lights in each switch indicate the level of heat
in use. Two indicator lights will illuminate for HI, one for
LO and none for off.
•
Push the switch once to turn the HI setting on.
•
Push the switch a second time to turn the LO setting
on.
•
Push the switch a third time to turn the heating ele-
ments off.
The level of heat selected will stay on until the operator
changes it.
NOTE:
The engine must be running for the heated seats to
operate.
FRONT VENTILATED SEATS —
IF EQUIPPED
The ventilated seats control buttons are
located on the center stack below the radio
screen, or within the Uconnect system. The
fans operate at three speeds: HI, MED,
and LO.
•
Press the ventilated seat switch once to choose HI.
•
Press the ventilated seat switch a second time to
choose MED.
•
Press the ventilated seat switch a third time to
choose LO.
•
Press the ventilated seat switch a fourth time to
turn the ventilation off.
NOTE:
The engine must be running for the ventilated seats to
operate.
For information on use with the Remote Start system,
see
page 19.
HEAD RESTRAINTS
Head restraints are designed to reduce the risk of injury
by restricting head movement in the event of a rear
impact. Head restraints should be adjusted so that the
top of the head restraint is located above the top of
your ear.
WARNING!
•
All occupants, including the driver, should not oper-
ate a vehicle or sit in a vehicle’s seat until the
head restraints are placed in their proper positions
in order to minimize the risk of neck injury in the
event of a crash.
•
Head restraints should never be adjusted while the
vehicle is in motion. Driving a vehicle with the head
restraints improperly adjusted or removed could
cause serious injury or death in the event of a
collision.
Front Head Restraints
Your vehicle is equipped with front four-way driver and
passenger head restraints.
To raise the head restraint, pull upward on the head
restraint. To lower the head restraint, push the adjust-
ment button, located at the base of the head restraint,
and push downward on the head restraint.
NOTE:
The head restraints should only be removed by quali-
fied technicians, for service purposes only. If either of
the head restraints require removal, see an authorized
dealer.
To adjust the head restraint forward, pull the top of the
head restraint toward the front of the vehicle as desired
and release. To adjust the head restraint rearward, pull
the top of the head restraint to the forward most posi-
tion and release. The head restraint will return to the
rear most position.
Head Restraint Adjustment Button Location
GETTING TO KNOW YOUR VEHICLE 33
2
Loading ...
Loading ...
Loading ...