Loading ...
Loading ...
Loading ...
Your PDP can memorize and store aiJ of the available channels for both "off-air"
(antenna) and cane channeis_ After the avaiiabte channds are memorized, use the
CH /x. and CH v buttons to scan through the channets_ This eliminates the need to
change channds by entering the channel digits. There are three steps for memorizing
channels: selecting a broadcast source, memorizing the channels (automatic) and
adding and deIeting channels (manual).
Jrce
Before },our television can begin memorizing the available channels, you must specify the type of signal
source that is connected to the PDP (i.e., an antenna or a cable system).
Pressthe MENU buttom Press the _ or _ button to
select "Channel", then press the ENTER button.
Pressthe ENTER button to select "Air!CATV"_
3
Pressthe _ or V button to select "Air", "STD",
"HRC" or "iRC", then press the ENTER buttom
o if you are connected to an antenna, leave "Air"
displayed. Hfyou connected cable, press the
A or _' button to the display the type of cable
system: "STD", "HRC" or "IRC".
(If you are not sure which type of cable system you
have, contact your cabie company}.
Pressthe MENU button to exit.
o STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to
identify the type of cable system that exists in your particular area. At this point the signal source
has been selected. Proceed to "Storing Channels in Memory" (Next page).
Loading ...
Loading ...
Loading ...