Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
111
Electrical connection
Electrical connection: UK
All electrical work should be carried out
by a suitably qualified and competent
Miele approved service technician in
strict accordance with current national
and local safety regulations (BS 7671 in
the UK).
This appliance is supplied with a mains
cable for connection to a 230V, 50Hz
single phase supply.
The voltage and connected load are
given on the data plate situated at the
front of the oven interior. Please ensure
that these match the household mains
supply.
Connection should be made via a fused
connection unit or a suitable isolator,
which complies with national and local
safety regulations, and the on/off switch
should be easily accessible after the
appliance has been installed.
If the switch is not accessible after
installation (depending on country) an
additional means of disconnection must
be provided for all poles.
Switches with a minimum all-pole
contact gap of 3mm are suitable for
isolating the appliance. These include
circuit breakers, fuses and protective
devices.
For extra safety it is advisable to protect
the appliance with a suitable residual
current device (RCD). Please contact a
qualified electrician for advice.
If the cable is damaged a new cable
must be fitted by a Miele approved
service technician.
This appliance conforms with European
Standard EN55011 as a Group2,
ClassB product. Group2 appliances
use high frequency energy in the form
of electro-magnetic waves to create
heat in food. ClassB is assigned to
appliances that are suitable for
domestic use.
Important UK
The wires in the mains lead are
coloured in accordance with the
following code:
- Green/yellow = earth
- Blue = neutral
- Brown or black = live
WARNING - THIS APPLIANCE
MUST BE EARTHED
Temporary or permanent operation on
an autonomous power supply system or
a power supply system that is not
synchronised with the mains power
supply (e.g. island networks, back-up
systems) is possible. A prerequisite for
operation is that the power supply
system complies with the specifications
of EN50160 or an equivalent standard.
The function and operation of the
protective measures provided in the
domestic electrical installation and in
this Miele product must also be
maintained in isolated operation or in
operation that is not synchronised with
the mains power supply, or these
measures must be replaced by
equivalent measures in the installation.
As described, for example, in the
current version of
BS OHSAS 18001–2 ISO 45001.
Loading ...
Loading ...
Loading ...