Loading ...
Loading ...
Loading ...
°'[)ME/REC©R©)H6
• If there is a power failure or this unit has been
unplugged for more than 30 seconds, the clock setting
and all timer programming will be lost.
• Ira disc is not inserted, "DVD" on the front panel display
flashes and timer recording cannot be performed. In
some cases, _ will appear momentarily around the start
time as the unit attempts to record. Please insert a
recordable disc.
• Ira cassette tape with a erase-protection tab is not in the
cassette compartment or there is no cassette tape in the
cassette compartment, "VCR" on the front panel display
flashes and timer recording cannot be performed. Please
insert a recordable cassette tape.
• Ira cassette tape ends during the timer recording, the
unit will automatically stop, eject the cassette tape, and
turn itself off. To continue recording, insert a recordable
tape.
• When all the timer recordings are completed, _ flashes.
Press [TIMER SET] to release the unit from the timer
standby mode.
• If both DVD and VCR are timer programmed, you cannot
use any functions for either unit during timer standby or
timer recording. If you want to use functions other than
recording under such condition, cancel timer recording
by pressing [TIMER SET] during timer standby or stop
recording by pressing [STOP m] / [STOP/EJECT • _] on
the front panel of the unit during timer recording.
• To cancel the timer standby mode, press [TIMER SET].
• When the starting and the ending time are the same,
"Exceeds 12 hours" appears and the program setting will
not be accepted.
• When the disc or cassette tape becomes full during the
recording, the unit turns itself off.
• If the starting time is earlier and the ending time is later
than the current time, the recording will start right after
you press [TIMER SET] at step 9 on page 43.
• You cannot change the audio language for the timer
recording of digital -IV broadcasting.
• The timer recording cannot be performed in DVD and
VCR at the same time. If you set 2 programmings with
the same channel and time in both devices, the program
which is set first will have the priority.
J
©
©
_,'s,
©
@
2,
• Timer program which has the earlier start time will be placed first in the timer program list, and be given priority over
the programs with the later start time when timer programs overlap.
• When timer programs overlap, the first 2 minutes (at the longest) of the later recording will be cut off.
• When 2 or more timer programs have the same start time, the program set first will be given priority.
• A timer recording of lower priority will be canceled or start from the middle.
• Check the overlapped timer programmings and change the priority if necessary.
[] When the starting time is the same:
A program set previously (PROG.A) has priority.
D
The first 2 minutes (at the longest) will be cut off
Jvhen recording to DVD only),
©
I _4_!
13
/............................................
EN 45
Loading ...
Loading ...
Loading ...