Loading ...
Loading ...
Loading ...
IIIIIi MERRECORDING
:!i
Analog TV For channel number 2-6 press, press [1_] or [ • ] to decide the channels. For other channels (7-69),
the channel will be decided as soon as you enter the channel number.
Analog CATV For channel number 1-12 press, press [1_] or [ • ] to decide the channels. For other channels (13-
125), the channel will be decided as soon asyou enter the channel number.
Digital TV For channel number 1-9 press, press [1_] or [ • ] to decide the channels. For other channels (10-99),
the channel will be decided as soon as you enter the channel number.
Digital CATV For channel number 1-13 press, press [1_] or [ • ] to decide the channels. For other channels (14-
135), the channel will be decided as soon asyou enter the channel number.
minor channels For channel number 1-9 press, press [1_] or [ • ] to decide the channels. For other channels (10-99),
the channel will be decided as soon as you enter the channel number.
<Hint>
• You can decide the 1-digit channel number by pressing 0 first, then enter desired 1-digit channel number.
e.g.) "5": [0]+[5]
• For selecting the channels with [A IV] you need to press [1_] or [ • ] to decide the channel number.
• For selecting the minor channels with [A/V], please make sure the minor channel your are selecting is existed.
[A /V] does not skip the non-existed minor channels.
Press [STOP •] / [STOP/EJECT • _] on the frontpanel
of the unit to stop the timer recording in progress.
[STOP •] on the remote control is not effective.
1} Press [TIMER SET].
2} Press [TIMER[.
3) Check the information.
4-A) To delete the timer program:
1 Use [A / V] to select the program you want to
delete, then press [OK].
2 Use [A / V] to select "Delete", then press [OK].
Confirmation window will appear.
3 Use [A / V] to select "Yes", then press [OK].
4-B) To correct the timer program:
1 Use [A / V] to select the program you want to
correct, then press [OK].
2 Use [A / V] to select "Program Change", then
press [OK].
3 Correct the timer program by using
[A /V / _!/I_], then press [OK].
5} Press [TIMER[ to exit.
6) Press [TIMER SET] to return to the timer standby
mode.
Each error number means:
E1-22 i Recording error other i E41 "Power failed
.........................................................................
E24 i Unrecordable disc _E42 No disc when
recording
.............. i ....................................... i .....................................................
E25-26 i Copy prohibited i E43 Already 49 titles
i program i recorded
E29 i Disc protected i E44 Already 254 chapters
i i recorded
E30 ! Disc full ! E45 Copy prohibited
i i program
E35 _PCAfull "1 _E46 It is impossible to
..............i....................................... i record additionally
E36 _Already finalized i on a disc recorded
[ video format disc i by other units
E40 i Some portion has when setting "
i not been recorded Make Recording
i because of program Compatible" to "OFF".
i overlapping.
i Recording did not
start at the start time..
• E23, E27, E28, E31, E32, E33 and E34 are not displayed.
• A program with the error number is grayed in the timer
programming list.
• Once the timer programming list with error line(s) is
displayed, or after canceling and setting again the timer
standby mode, the program line(s) with error will be
cleared.
N PCA isa disc's space reserved for recording test.
44 EN
Loading ...
Loading ...
Loading ...