Loading ...
Loading ...
Loading ...
• Selecting the MULTI CH INPUT
Press MULTI CH INPUT on the front panel or
MULTI CH IN on the remote control so that MULTI
CH INPUT appears in the front panel display and
on the video monitor.
blULTI CH
INPUT
= ',
%
Front panel
VlU LT I
MULTICHIN
or
Remote control
CH I: HPUT
When MULTI CH INPUT is shown in the front panel display and
the video monitor, no other source can be played. To select
at)other input source with the INPUT selector on the li'ont panel
(or one of the input selector buttons on the remote control), press
MULTI CH INPUT so that MULTI CH INPUT disappears from
the front panel display and the vide() monitor.
• Enjoying multi-channel software in
6.1/7.1 channel surround
If you connected one or tw,o surround back speakers, use
this feature to enjoy 6.1/7.1-channel playback for
multi-channel sources using the Dolby Pro Logic I[x,
Dolby Digital EX or DTS-ES decoders.
Set AMP/SOURCE/TV to AMP and then press
EXTD SUR. on the remote control to switch
between 5.1 and 6.1/7.1 channel playback.
Press <1 / _> repeatedly to select a decoder
when the name of a decoder (PLllxMovie, for
example) is displayed in the front panel
display.
Auto
l:ii...ii0
lfa signal flag can be recognized, the unit selects the
optimum decoder to play back the signal in 6.117.1
channels. If the signal flag cannot be recognized, or
no flag is present in the input signal, this unit cannot
antonmtically play back the signal in 6.117.1
channels.
Decoders
You can select a decoder from the following list
depending on the format of the sollvvare you are
playing.
F:i....:_[::.::i"i,:::,,...,:i.e
To play back Dolby Digital or DTS signals in 7. l
channels using the Pro Logic l]{x movie decoder.
F::'L :[_x iit..is :i.,:::.
To play back Dolby Digital or DTS signals in 6.1/7.1
channels using the Pro Logic I]{x music decoder.
i::_:.:,.....i::,::_
To play back Dolby Digital signals in 6.1/7.1
channels using the Dolby Digital EX decoder.
DTS signals are played back in 6.1/7.1 channels
using the DTS-ES decoder.
i:::_:.:,.
To play back Dolby Digital or DTS signals in 6.1/7.1
channels using the Dolby Digital EX decoder.
I ll,,, I,,,
,,Jl i
To play back Dolby Digital or DTS signals in 5.1
channels.
_.,#._
When Surround Back is set Io Large x l or Snlall x l
(see page 91 ), tile surround back cht.untel will oulput front Ihe left
SURROUND BACK speaker ternlinals.
• Some 6. l-channel compatible discs do not h:.ve a signal flag
which cannot be automatically detected. When you play these
kinds of discs in 6. I-channel, select decoders (PLl/xMovie,
PLIlxMusic, EX/ES or EX) manually.
• 6. 117.l-channel playback is not possible even if EXTD SUR. is
pressed in the following cases:
When Surround (see page 91) or Surround Back (see page 91 )
is set to None.
When the source connected to the MULTI CH INPUT jacks
are being played.
When the source being played does not contain surround L/R
channel signals.
When a Dolby Digital KARAOKE source is being played.
When 2ch Stereo, 7ch Stereo or PURE DIRECT is selected.
• When the power of this unit is turned off the input mode will be
reset to AUTO.
• The Pro Logic IIx decoder is not available when Surround Back
is set to None (see page 91 ).
• PLi1xMovie cannot be selected when Surround Back is set to
Large xl or Small xl (see page 91).
4O
Loading ...
Loading ...
Loading ...