Loading ...
Loading ...
Loading ...
I[o!'_,IIt il'olAVl
Extreme caution should be exercised when you play back CDs encoded in DTS.
If you play back a CD encoded in DTS oil a DTSqncompatible CD player, you will only hear some unwanted noise that may damage
your speakers. Check whether your CD player supports CDs encoded in DTS. Also. check the sound output level of your CD player
before you play back a CD encoded in DTS.
(U.S.A. model)
2 Turn on the power of the video monitor
connected to this unit.
3 Press SPEAKERS A or B on the front panel
(or press SPEAKERS A or B on the remote
control).
Each time you press SPEAKERS A or B, the
respective speakers are turned on or off.
4 7 6
w
iΒΈ.... :_ii_
U.S.A. model
Press MAIN ZONE ON/OFF (or set
AMP/SOURCE/TV to AMP and then press
POWER on the remote control) to turn on the
power of this unit.
SPEAKERS A _PEA_E_ B
_ , ,, or
,5-
Front panel Remote control
When bi-wiring, select both A and B.
Rotate the INPUT selector on the front panel
(or press one of the input selector buttons on
the remote control) to select the desired
input source.
Front panel Remote control
The name of the currently selected input source
appears in the front panel display and on the video
monitor for a few seconds.
Arap
Front panel
or
Remote control
r. _... , -'-/FJ2
Name of the currently selected input source
Start playback or select a broadcast station
on the source component.
Refer to the operation instructions for the component.
See page 47 for details about tuning instructions.
37
Loading ...
Loading ...
Loading ...