Loading ...
Loading ...
Loading ...
FM
AM
Problem
FM stereo reception is
noisy.
There is distortion, and
clear reception cannot
be obtained even with a
good FM antenna.
The desired station
cannot be tuned in with
the automatic tuning
method.
See
Cause Remedy
page
The characteristics of FM stereo
broadcasts may cause tiffs problem
when the transmitter is too far away or
the antenna input is poor.
Check tile antenna connections.
Try using a high-quality directional FM
antenna.
29
Use tile manual tuning method. 48
There is multipath interli:rence. A(liust the antenna position to eliminate
multipath interference.
The signal is too weak. Use a Ifigb-quality directional FM antenna.
Use the manual tuning method.
29
48
Previously preset This trait has been disconnected l_r a Preset the stations again.
stations can no longer long period. 48
be tuned in.
The signal is weak or the antenna
connections are loose.
Noises result from lightning,
l]llorcscent lamps, motors,
thermostats and other electrical
equipment.
A TV set is being used nearby.
The desired station
cannot be tuned in with
the automatic tuning
method.
Tighten the AM loop antenna connections
and orient it for the best reception.
Use the manual tuning method.
Use an Otltdoor antenna and a ground wire.
This will help somewhat, but it is difficult to
eliminate all noise.
Move this unit away from the TV.
There are continuous
crackling and hissing
noises.
There are buzzing and
whining noises.
48
• XM Satellite Radio
If an operation takes longer than usual or an error occurs, one of the following messages may appear in the front panel
display. In this case, read the cause and follow the corresponding remedies.
Status message
CHECK ANTENNA
UPDATING
NO SIGNAL
LOADING
OFF AIR
<XM> - - -
<CAT> - - -
Cause
The XM Connect-and-Play digital antenna
accessory is not connected, or does not
work properly.
The XM user encryption code is being
updated.
The signal is too weak.
Ittakes longer than four seconds for audio
or text data to be decoded.
The XM Satellite Radio channel you
selected is not currently broadcasting any
signal.
The channel Station ID (SID) is no longer
avaihlble.
See
Remedy
page
Check the XM Connect-and-Play digital antenna
accessory connections.
Wait until the encryption code is updated.
Check the XM Connect-and-Play digital antenna
accessory connections and orient it for the best
reception.
Wait until the decoding process has finished.
Check the channel number again or select another
XM Satellite Radio channel.
No artist name/feature or song/1)rogram
title is available.
No channels are available for Ihe selected Select anolher cbalmel category by pressing
CATEGORY (or A-E/CAT. <31[:> on the remote
calegory, conlro] repeatedly.
53
53
57
57
124
Loading ...
Loading ...
Loading ...