Loading ...
Loading ...
Loading ...
|:/.._j_[O]I_[I,[O]dlI:{O]I_._.___|II]:/-'_"
Press LEARN using a ballpoint pen or similar
object.
LEARN and tile selected componeut l_lalne (ex. DVD)
appear alternately in the display window.
!,. J!lg',
If I I1
• Do clot press and hold LEARN. If you hold it down lbr
nlore than 3 seconds, the remote enters the remote control
code setting mode.
• If you do ]cot complete each of the lk>llowing steps within
30 seconds, the learning mode will be automatically
canceled. In this case. press LEARN again.
Press the button for which you want to
program the new function.
LEARN appears in the display window.
Press LEARN again to exit the learning
mode.
• ERROR appears in the display window if you press a button not
indicated in the respective step, or when you press more than
one button simultaneously.
• This remote control can learn approximately 200 flmctions.
However. depending on the signals learned. FULL may appear
in the display before you program 200 fimctkms. In this case.
clear unnecessary programnled hmctiolcs to nlake room lklr
l_lrther learning.
• Learning may not be possible in the following cases:
When the batteries in the remote control lor this unit or other
compoccents are weak.
When the distance between the two remote controls is too
great or too small.
When the remote control infrared windows are not facing each
other at the appropriate angle.
When the remote control is exposed to direct sunlight.
When the lhnction to be programmed is continuous or
[lllCOm nloIL
(U.S.A. model)
1% 1=_ ; _ =m_ =%,=
Press and hold the button you want to
program on the other remote control until OK
appears in the display window.
NG appears in the display v,,indow if learning was
unsuccessful. In this case, start over from step 5.
(U.S.A. model)
• If you want to program another function, repeat steps 5
and 6.
• If you continuously want to program another function for
another componenl, press SELECT _ / _7to select the
component and then repeal sleps 5 and 6.
108
Loading ...
Loading ...
Loading ...