Loading ...
Loading ...
Loading ...
l_lql,,Pb'ilq +
After all menu items have been measured, "Measurement
Over" appears on the screen and the results for each item
are displayed.
• Press V and select Setup tu set the measured values.
• Press A and select Retry to retry the AUTO SETUP
procedure.
• Press E:>and select Detail to view information about
measurement results and warning messages. For inure
details abuut warning messages, see
TROUBLESHOOTING page 126.
• Press <1 and select Exit to exit l?om the AUTO SETUP
procedure. If you select Exit. "Don't Setup?" appears on
the screen. To set the measured vahms and exit. select Yes.
To cancel the settings and exit. select No.
"4+'--
Ifyou want tu make more detailed settings, change the system
parameters using the Manual Setup menu. If you want tu return to
the Auto Setup settings at'ter making settings in the Manual Setup
menu. nuvigate to the hfformatiun screen in the Autu Setup menu.
press A / V repeatedly tu select the parameter you want to a@lst
and then press ENTER.
• If you change speakers, speaker pusitiuns, or the layout of your
listening envirunment, pertorm AUTO SETUP again to re-
calibrate your system.
• Depending on yuur listening enviromnent. SubWli":REV may
appear in the Wiring results. In this case. SWFR Phase in the
Manual Setup mmm (see page 92) is automatically set to
Reverse. To select the desired setting, change the SWFR Phase
parameter in the Manual Setup menu.
• In the Distance results, the distance displayed may be longer
than the actual distance depending on the characteristics of yuur
subwooti:r. This may also be the case when using an external
amplifier.
• In the Equalizing results, different values may be set tbr the
same band to provide finer a@lstments.
36
Loading ...
Loading ...
Loading ...