Loading ...
Loading ...
Loading ...
l:/:li_[o]l:lgo]_TIl:{o]llffff__lll]:l-'_"
Setting remote control AMP codes
Select one of the following codes to set tile remote control
AMP code for the component you want to use.
Set AMP/SOURCEFFV to AMP or SOURCE and then
change the remote control code settings.
AMP library
code
(remote
control
setting)
Function
Remote
control
AMP ID (this
unit'ssetting:
see page 102)
To operate this unit clsing
2001 tile def_lult code. IDI
(initial setting) To operate Zone 2 orZone 3 (initial setting/
features (see page 1151.
To operate Ihis unit using an
alternative code.
2002 ID2
To operate Zone 2 or Zone 3
features (see page 115).
• You need to set the corresponding remote control AMP ID
(see page 1021.
• When using nmltiple YAMAHA receiverUamplifiers, you
may be able to operate the other conlponents
simultaneously with the delhult code setting. In this case,
set one of the alternative codes to operate this unit
separately.
Setting remote control tuner codes
Select one of the following codes to set tile remote control
tuner code for the component you want to use.
Set AMP/SOURCEFFV to SOURCE and press TUNER
on the remote control to select TUNER as the input source
and then change the remote control code settings.
Remote
Tuner
control
librarycode tuner ID
(remote Function
control (this unit's
setting) setting:
see page 102)
2602 To opcnltc this unit using ID 1
(initial setting) the default code. (initial setting)
26(}3 To operate Ihis unil using an ID2
alternative code.
• You need to set the corresponding remote control tuner ID
(see page 102).
• When using nmltiple YAMAHA receivers/an/plifiers, you
may be able to operate the other conlponents
sinmltaneously with the default code setting. Ii1this case,
set one of the alternative codes to operate this unit
separately.
Setting remote control XM codes
Select one of tile follo'a, ing codes to set the remote control
XM code for the component you want to use.
Set AMP/SOURCEFFV to SOURCE and press XM on the
remote control to select XM as the input source and then
change the remote control code settings.
Remote
XM library control XM
code
(remote Function ID
control (this unit's
setting) setting:
see page 102)
2604 To operate this unit using IDI
(initial setting) the default code. (initial setting)
2605 To operate this unit using an 1D2
alternative code.
• You need to set the corresponding remote control XM ID
(see page 1021.
• When using nmltiple YAMAHA receivers/amplifiers, you
may be able to operate the other components
simultaneously with the default code setting. In this case,
set one of the alternative codes to operate this unit
separately.
Press ENTER.
Tile four-digit code set for the selected component
appears in the display window.
0000 appears in the display window if no code has been set.
Press the numeric buttons to enter the
four-digit remote control code for the
component you want to use.
For a complete list of available remote control codes,
refer to "LIST OF REMOTE CONTROL CODES" at
the end of this manual.
Press ENTER to set the number.
OK appears ill tile display w,indow, if"setting was
successfld.
NG appears in the display window if the setting was
unsuccessfld. In this case, start over from step 3.
-#.
If you continuously want to set up another code liar another
component, press the input selector button or
SELECT A / V to select the component and then repeat
steps 4 through 6.
106
Loading ...
Loading ...
Loading ...