Loading ...
Loading ...
Loading ...
IFJ_W:h_iol_lPh'_
• Sur.lnitialize (Surround initialize)
Use this feature to initialize the parameters for each souM
field program within sound field program groups. When
you initialize a sound field program group, all of the
parameter values within that group revert to their initial
settings.
Adjusted sound field parameter settings are displayed in
blue.
Manual Setup > Option > Sur.lnitialize
Choices: STEREO, MUSIC, ENTERTAINMENT,
MOVIE THEATER, SURROUND, All
• Press/_ / V to select the sound field program you want
to initialize and then press ENTER.
• Select "All" to initialize settings for all sound field
program parameters.
• Decoder Mode (Decoder mode)
You can select the decoder used by this unit.
Manual Setup > Option > Decoder Mode
Choices: Auto, Last
• Select "Auto" if you want this unit to automatically
detect input signal types and select the appropriate
decoder.
• Select "Last" if you want this unit to automatically
select the last decoder used for the connected source.
• Memory Guard (Memory Guard)
Use this feature to prevent accidental changes to DSP
program parameter values and other system settings.
Manual Setup > Option > Memory Guard
Choices: Off, On
Sound fiehl program groups cannot be initialized when Men/ory
Guard is sel to "On" (see page 98).
• Audio Select (Audio selection)
Use this feature to designate the default input mode this
unit selects when the power is turned on and the input
source (such as a DVD player) is connected to the
DIGITAL INPUT jacks on this unit.
Manual Setup > Option > Audio Select
Choices: Auto,Last
Select "On" to protect:
• DSP program parameters
• All menu items except Memory Guard and System
Memory - Load.
lll general, front panel and remole cOnll'ol operatiolJs are nol
alfccled when Memory Guard is sel to "On". However, you
cannot at[jnsl the tone control/lsing Tone ColJlro].
• Select "Auto" if you want this unit to automatically
detect input signal types and select the appropriate
input mode.
• Select "Last" if you want this unit to automatically
select the last input mode used for the connected
source.
Selecling "Last" does not recall the last setting for the
EXTD SUR. bntton.
98
Loading ...
Loading ...
Loading ...