Loading ...
Loading ...
Loading ...
rfP_q:l_ff:liPPtih'[ J
After AUTO SETUP
Warning message Cause See
page
Speaker polarity is not correct. This
WI:Out of Phase message may appear depending on Ihe 15
speakers even when tile speakers are
connected correctly.
W2:Over24m/80ft The dislance belween the speaker and Ihe
listening position is over 24 m (80 fl).
W3:Level Error
The difference of vohlme level among
speakers is excessive. (No le,, el correction
is made./
The Wiring results arc incompatible with
W4:SP Mismatch
the current user settings.
Remedy
Check the speaker connections lk)r proper polarity
(+ or ).
Bring the speaker closer to the listening position.
Rea;ljust the speaker installation so that all speakers
arc, set in locations with similar conditions.
Check the speaker connections.
Use speakers of similar quality.
A;!just the output volume of the subwoofcr.
The current user settings will take priority.
15
33
• If the ERROR or WARNING screens appears, check the cause of the problem and then perlk)rm the AUTO SETUP procedure again.
• If warning W- 1or W-4 appears, corrections are made. but they may not be optimah
• If warning W-2 or W-3 appears, no corrections are made.
• If error E- 10 occurs repeatedly, please contact a qualified YAMAHA service center.
• HDMI
See
Error message Cause Remedy
page
Device Over More Ihan 5 HDMI componcnls including Reduce Ihe number of the conneclcd HDMI
fills unit are connected, components.
HDCP Error HDCP testin_ failed. Check tirol Ihe connecled HDMI components suplx)rl
the HDCP copy proleclion standards.
127
Loading ...
Loading ...
Loading ...